Purified water system for pharmaceutical info:
| Project information: | Feed water: Tap water |
| Treated water quality: | Produced water is used as pharmaceutical water, according to USP
standards: TOC (total organic carbon) <500ppb, conductivity
<1.3us/cm, aerobic bacteria <100cfu/ml |
| Outlet capacity: | 250L/hr,<1.0µS/cm |
| Power supply: | 3PH x 415V, 50Hz,4KW |
| Installation size: | L2.5×W1×H1.8(m), Packing size 7m³,exclude the sterilizer tank. |
| Production time: | 6 weeks |
| Contact date | Feb 7th,2022 |
| Process flow chart | Raw water tank—booster pump—multimedia filter—activated carbon
filter—softening filter—precision filtration—first stage high
pressure pump—first stage reverse osmosis—PH adjustment
device—second stage high pressure pump—second stage reverse
osmosis—second stage RO Water tank—EDI booster pump—EDI—TOC
decomposer—membrane filter—product water tank |
| Mark: | Use 316 for all parts in contact with water, and 304 for other
racks and electrical boxes; Note: The accessories after the secondary reverse osmosis, such as
pressure gauges and flowmeters, use quick connectors (ferrule
connections), and the front ones can be threaded. |
Client requirement:
The system must comply with GMP pharmaceutical use for medicine
manufacturing. All pipes should be SS316. The system must be a
double pass RO system with EDI.
Process: Double RO+system+EDI, all material SS316
1) For system:
1. The system should seamlessly fit into user current distribution
loop which is 126m in total length with a diameter of 1 inch and 8
sampling points.
2. The system must be compatible with user existing 3000L storage
water tank.
Can I know will the product water pipe connect to storage water
tank or loop, and connection size there?
The product water pipe will connect to our storage tank
3. The piping of the system must be SS316L and its interior surface
finish requirement of <0.8micrometer Ra
As DB and MB require chemicals for resin regeneration, even SS316L
corrosion resistance not good as UPVC, we can revise if required.
This is for connection from TOC resolver to product water tank
connection
4. The requirement of the purified water distribution and
generation loop to conduct sanitization is required.
This could be heat sanatization using hot water at 85 C
With regards to the ss316 piping for the system;
Based on the definition of purified water, it will be required to
have
SS316L right after the 1st RO stage and onwards. I.e., in the
generation
system itself, it will be made of SS316L. Only at pretreatment
stage
until the RO membrane to made from PVC pipes.
More tap purified water system for pharmaceutical pls contact us:
Email: sales@seawaterroplants.com
www.seawaterroplants.com
Mobile/Whatsapp/Wechat +86 135-4477-4483
1- We will offer 3Q(IQ, OQ, PQ) once finished the production, to
fill info in.
The system is designed as whole integrated type, before delivery we
will commission to ensure it can operate properly, and send you
video of that.
